Compatible Modules

IT'S POWERFUL! IT'S FLEXIBLE! IT'S PUZZLE!

Ethernet Module

(MOD-ETH)

Modulo EthernetThe ETHERNET module enables the installation of an ETHERNET port for communications. Its configuration can be accessed via WEB for the different available options. Compatible with: SIMPLE MEDIA CONVERTER (GN-CM-S), ANALOG MODEM (GN-MDM-A).

[Back]
[More Info.]

I/O x3 Module

(MOD-IO-3-P1)

Modulo Entrada Salida X3 This module is an intermediate plate that enables the device to behave like a RTU. The DIGITAL INPUT PORTS or DIGITAL PUTPUT PORTS must be added to this plate, according to the desired configuration. Each of these modules can function with up to 3 digital input/output ports. Only compatible with P1 ports. Compatible with: MEDIA CONVERTER AND RTU (GN-CM-ETH-RTU).

[Back]
[More Info.]

I/O x3 Module

(MOD-IO-3-P2)

Modulo Entrada Salida X3 This module is an intermediate plate that enables the device to behave like a RTU. The DIGITAL INPUT PORTS or DIGITAL PUTPUT PORTS must be added to this plate, according to the desired configuration. Each of these modules can function with up to 3 digital input/output ports. Only compatible with P2 ports. Compatible with: MEDIA CONVERTER AND RTU (GN-CM-ETH-RTU)

[Back]
[More Info.]

Digital Input Module

(MOD-IO-ED)

Modulo de Entrada Digital The DIGITAL INPUT MODULES enable the port to read different digital inputs with voltage ranges from 12Vdc to 100 Vdc. Up to three devices can be installed for each INPUT/OUTPUT PORT. Compatible with: MEDIA CONVERTER AND RTU (GN-CM-ETH-RTU).

[Back]
[More Info.]

Digital Output Module

(MOD-IO-SD)

Modulo de Salida Digital The DIGITAL OUTPUT MODULES enable the port to remotely change output state. Supports 115V 1A. Up to three devices can be installed for each INPUT/OUTPUT PORT. Compatible with: MEDIA CONVERTER AND RTU (GN-CM-ETH-RTU).

[Back]
[More Info.]

Radio Frequency Module

(MOD-RF)

Modulo de Radio Frecuencia The RF MODULE enables communication through radio frequency. According to the installed module, communications of several kilometers distance with different topologies (point to point, point to multipoint, mesh) can be achieved, in frequencies of 900 Mhz and 2.4 Ghz. Compatible with: MEDIA CONVERTER AND RTU (GN-CM-ETH-RTU), SIMPLE MEDIA CONVERTER (GN-CM-S).

[Back]
[More Info.]

RS-232 Module With Terminal Blocks

(MOD-RS232-B)

Modulo RS-232 con Bornera The RS-232 MODULE WITH TERMINAL BLOCKS enables the device to connect with a RS-232 port using a five-element terminal block. It has an ESD protection for up to 15kV. Compatible with: MEDIA CONVERTER AND RTU (GN-CM-ETH-RTU), SIMPLE MEDIA CONVERTER (GN-CM-S), ANALOGICAL MODEM (GN-MDM-A).

[Back]
[More Info.]

RS-232 DB9 Module With Female Connector

(MOD-RS232-F)

Modulo RS-232 DB9 Hembra RS-232 DB9 MODULE WITH FEMALE CONNECTOR enables the device to connect with a RS-232 port, using a DB-9 female connector. It has an ESD protection for up to 15kV. Compatible with: MEDIA CONVERTER AND RTU (GN-CM-ETH-RTU), SIMPLE MEDIA CONVERTER (GN-CM-S), ANALOGICAL MODEM (GN-MDM-A).

[Back]
[More Info.]

RS-232 DB9 Male Module

(MOD-RS232-M)

Modulo RS-232 DB9 Macho RS-232 DB9 MODULE WITH MALE CONNECTOR enables the device to connect with a RS-232 port, using a DB-9 male connector. It has an ESD protection for up to 15kV. Compatible with: MEDIA CONVERTER AND RTU (GN-CM-ETH-RTU), SIMPLE MEDIA CONVERTER (GN-CM-S), ANALOGICAL MODEM (GN-MDM-A).

[Back]
[More Info.]

RS-232 Module With Removable Terminal Blocks

(MOD-RS232-B-R)

Modulo RS-485 The RS-232 MODULE WITH REMOVABLE TERMINAL BLOCKS enables the device to connect with a RS-232 port using a five-element terminal block. It has an ESD protection for up to 15kV. Compatible with: MEDIA CONVERTER AND RTU (GN-CM-ETH-RTU), SIMPLE MEDIA CONVERTER (GN-CM-S), ANALOGICAL MODEM (GN-MDM-A).

[Back]
[More Info.]

RS-485 Module With Conector

(MOD-RS485-C)

Modulo RS-485 The RS-485 MODULE enables the device to connect with a RS-485 port, through a connector. It has an ESD protection for up to 15kV. Compatible with: MEDIA CONVERTER AND RTU (GN-CM-ETH-RTU), SIMPLE MEDIA CONVERTER (GN-CM-S), ANALOGICAL MODEM (GN-MDM-A).

[Back]
[More Info.]

RS-485 Isolated Module With Conector

(MOD-RS485-C-A)

Modulo RS-485 Aislado The RS-485 ISOLATED MODULE enables the device to connect with a RS-485 port, through a connector. It has an ESD protection for up to 15Kv and surge protection of up to 5 kV for 60 seconds. Compatible with: MEDIA CONVERTER AND RTU (GN-CM-ETH-RTU), SIMPLE MEDIA CONVERTER (GN-CM-S), ANALOGICAL MODEM (GN-MDM-A).

[Back]
[More Info.]

RS-485 Module With Terminal Blocks

(MOD-RS485-B)

Modulo RS-485 con Bornera The RS-485 MODULE WITH TERMINAL BLOCKS enables the device to connect with a RS-485 port using a three-element terminal block. It has an ESD protection for up to 15kV. Compatible with: MEDIA CONVERTER AND RTU (GN-CM-ETH-RTU), SIMPLE MEDIA CONVERTER (GN-CM-S), ANALOGICAL MODEM (GN-MDM-A).

[Back]
[More Info.]

RS-485 Isolated Module With Terminal Blocks

(MOD-RS485-B-A)

Modulo RS-485 aislado - b The RS-485 ISOLATED MODULE WITH TERMINAL BLOCKS enables the device to connect with a RS-485 port using a three-element terminal block. It has an ESD protection for up to 15Kv and surge protection of up to 5 kV for 60 seconds. Compatible with: MEDIA CONVERTER AND RTU (GN-CM-ETH-RTU), SIMPLE MEDIA CONVERTER (GN-CM-S), ANALOGICAL MODEM (GN-MDM-A).

[Back]
[More Info.]

USB Module

(MOD-USB)

Modulo USB USB module enables to connect the device through a USB 2.0 port. This port is available in the USB DEVICE version. Compatible with: ANALOGICAL MODEM (GN-MDM-A).

[Back]
[More Info.]

Reset Module

(MOD-RST)

Modulo RESET The RESET MODULE restarts the device. It can be configured every 6, 12 or 24 hours. Compatible with: MEDIA CONVERTER AND RTU (GN-CM-ETH-RTU), ANALOGICAL MODEM (GN-MDM-A).

[Back]
[More Info.]